1967-69 Geek- Competition Camaro Front Suspension Kit

and

1967-69 Geek- Competition Camaro Rear Torque Arm Kit, Flanged Axle

as one kit

Suspension Geek working with MR Roadster brings you the best torque arm out!

Tested by Robby Unser (the nine-time winner of the Pikes Peak International Hillclimb} and Al Unser Jr (two-time Indianapolis 500 winner) .... yes its true.. we have been racing together  for years and are proud to bring a championship tested suspension system

• 100% bolt-in - no cutting of the vehicle to install
• Replaces factory leaf springs with coil-over shocks within a compact design
• Designed ride height is 2" lower than stock, easily adjustable with coil overs
• Lower shock mount has two positions to accommodate multiple length shocks
• Adjustable Panhard bar to control lateral movement and roll center height
• 1-1/4” x .125” wall DOM trailing arms with rebuildable and greaseable 2” Johnny Joints®
• Fabricated steel 9" Ford flanged rear end housing...INCULDED!!! 
• 58” overall rear end width, hub face to hub face (unique to 1st gen Camaro) factory is 60 inches
• Includes sub-frame connectors that bolt directly to factory front subframe mounts... INCLUDED
• All hardware included
• Adjustable for near-endless setup variations:
  • Ride height
  • Roll center by moving the Panhard bar in one of three positions on each end for a 1.75” adjustment at desired ride height
  • Instant center using one of three lower arm positions for a 4” total movement 
  • Pinion angle with serrated hardware (4 degrees of total adjustment)
  • Sway bar rate – 11 spring rates to choose from with 650 supplied 
  • Alignment capability for positive tracking and tire wear
• Designed to complement many front end kits and handle the highest level of load for street, road course, autocross, and Sport/Pro touring applications
• Rear crossmember is made from .120" wall steel tube and is attached to inner frame rails and body
• Front Cross Member is .109” wall and clearance for most transmissions
• Subframe connectors reduces chassis flex and provide a rigid mount for the trailing arms
• Kit works with both stock wheel wells and mini-tubs
• Kit allows room for both OEM fuel tanks or custom fuel cells
• Rear-end housing has sway bar, trailing arm, Panhard bar, and torque arm mounts installed
• Kit includes a 7/8" x 26” solid torsion bar style sway bar. 
• Sway bar connects to the rear end housing with 7-1/2" long aluminum arms
• All sway bar links and hardware is included